Every person may have their own individual opinion involving tankless water heater installation.
Pioneer Plumbing has built a reputation of honesty with our long time returning customers. We’ve found that “doing the right thing” in all aspects of our company has brought us to where we are today, and will continue to guide us into the future. Don’t hesitate to call and ask us any plumbing, heating, ventilation, or gas related questions. Chances are if you have a tricky issue, we can solve it.
We have a few goals for our clients. One is to be available for you. It is very uncommon that when you call us we are unable to make it within the same day. We give our repeat customers priority service so if you’ve used us before and you have an emergency, we are going to do what we need to, to get someone there.
Two is to be upfront and honest. From our quotes to our service techs on site, we don’t like to beat around the bush. We will let you know our concerns, our recommendations, and our opinions on how we would handle each situation as if it were our own residence where the problem occurred. We won’t tell you the job is only a 2 hour repair when we have had situations where it turned into an all day repair.
Three is to stand behind our installations and repairs. With mechanical work, it is very common for jobs to get larger or go sideways as you get into them. If we give you a quote we will stand true to the price, if we complete a job for you and you are unhappy with the finished product, we will come back and make it right. In return, all we ask is that you communicate with our office respectfully and honestly so that we can make sure at the end of the day you are happy with our services!
So next time you have a plumbing, heating, cooling, or gas question, repair, or installation you would like quoted, give us a call! Were here to help.
Types of Plumbing and Pipe Fittings
Types of Pipe Fittings
Double Tapped Bushing
Plug and Cap
Adaptors connect pipes that are not the same type. Because an adaptor can be male or female on one end, it can turn a pipe male or female.
If ends are non-threaded, they are left to be welded, soldered or glued to the pipe. Adaptors are used for PVC and copper piping.
A barb connects hoses to pipes. It is usually male at one end. The other has a barbed tube, which is a ridged and tapered cone.
It may also have a type of clamp to keep it secure. Barbs are made of plastic if they carry cold water and brass if they carry hot water.
A coupling makes it easy to connect two pipes that have the same diameter and are the same type. It’s also used to repair a broken or leaking pipe. Along with a normal coupling, two other types are the compression coupling and slip coupling.
The compression fitting is connected between two pipes via rubber seals or gaskets on both sides which prevents leaking. A slip coupling includes two pipes, one of which slides out of the other pipe to a various length, to repair a specific length of damaged pipe.
A cross fitting has openings on all four of its ends and can connect four pipes. Cross fittings come with three inlets and an outlet or three outlets and an inlet.
Because they are the connecting point for four pipes, they are under more stress than other types of fittings and typically built tougher than other fittings.
Double Tapped Bushing
This is a type of nipple, but it has threading on both the inside and the outside. Because this center hole is threaded (tapped) from both top and bottom, it’s referred to as double-tapped.
A double tapped bushing is also a type of reducer, but does not have a reducer’s flexibility. A double tapped bushing is usually female.
Not surprisingly, this sort of fitting has a bend that reminds you of the arm joint. They help the flow of water change direction. Elbows come in several degrees, including 22.5, 45, and 90 degrees.
Reducer elbow variations also exist for when the piping diameters being connected are different. Elbow fittings can be made of different materials, and most are female.
This connects two pipes through the use of a screw or other device. This makes the fitting easy to install. The mechanical sleeve or coupling is usually made of rubber that is inserted inside a metal jacket (stainless steel clamp).
When the clamp is tightened, it compresses the rubber inside to make a tight seal. Because this fitting can be slightly flexed, it can accommodate small misalignments in hard to install locations.
This is a short fitting that can be made of metals such as copper, brass or steel or chlorinated polyvinyl chloride (CPVC). Instead of connecting two pipes, a nipple connects two fittings.
If it has a continuous threading, it is a closed nipple. They are usually male and come in varying lengths.
Plug and Cap
Plugs and caps are both used to close up pipe openings during inspections and repairs. The main difference is that a plug is male while a cap is female. Most often, caps and plugs are threaded.
Plugs and caps are made of several materials, including metal, plastic or rubber and can be welded, soldered, glued, or threaded into the pipe.
This fitting makes a flow smaller and thus reduces it. Reducers come in two types. The concentric reducer joins two pipes on the same axis, and the eccentric reducer is used to join pipes of different diameters.
The concentric reducer looks like a cone, while eccentric reducers look somewhat like bells with offset center lines. They prevent air bubbles in the pipes.
A tee has an inlet and an outlet and is shaped like the letter “T.” These fittings come in different sizes and are considered sturdier than the cross fitting.
A diverter tee is used in heating systems that use water. They come with directional markings and need to be installed correctly for the system to operate.
Unions can have either male or female threads. They are similar to couplings, but the difference is unions are easy to remove making them convenient for maintenance or a planned future replacement.
A coupling, on the other hand, is more permanent and needs to be cut out. A union contains three parts: nut, male end, and female end. The nut is used to join the male and female ends.
Valves allow the flow of fluids to be adjusted. There are different types, including throttling, non-return and isolation. Non-return valves only allow the liquid to flow in one direction and are often found in drains. They’re also called check valves.
Isolation valves sequester a part of the plumbing system so that the system can be serviced or maintained. These valves are either left open or left closed all the time. However, because they may need to be used in a emergency, they should be checked now and then to see if they’re operational.
Throttling valves control the pressure and amount of a fluid. Because this stresses the mechanism, they tend to wear out faster than other valves. They are usually installed near isolation valves.
Built in the shape of the letter “Y,” this fitting is made to connect three pipes. Y fittings allow the pipes to change their elevations and to branch out into fresh water lines or drains.
Wyes are similar to tee fittings but the smoother angling reduces friction and turbulence in the water. This fitting is most commonly used to connect a vertical drainpipe to a horizontal one.
We’re a full service plumbing company who can tackle all of business or home service needs, which includes new installations, repair of leaks, routine maintenance and any sort of plumbing work in commercial and residential settings. Toilet, tub or tap… whatever it is that you require you can have faith in us to send out an accredited plumber to handle everything in a respectful and competent manner.
Repairs can vary from modest jobs – like a dripping tap – to more acute ones which are, or possibly may be, devastating. Our committed plumbers can offer the skills, tools and experience to sort out almost any challenge that pops-up, and they’re specialists at anything from pipe installations to leak troubleshooting.
We’re able to immediately resolve any dilemmas with plumbing that could occur at your house or business premises. For any plumbing emergency, please call us. We’ve got a 24-7 emergency plumber on call who’ll be dispatched to your premises ASAP. Any time day or night, you can trust in us for considerate and punctual support in any emergency. We know how upsetting plumbing issues tend to be, particularly if it’s an unexpected emergency after regular business periods.
Installations of All Kinds
We at Pioneer Plumbing are proud of our lengthy history of quality work. Regardless if you’d like to have some insulating pipe, or a new tub put in, or you need a re-pipe or installation in a commercial or residential premises, we’ve got the knowledge and experience to make sure that it is carried out properly.
We’re in addition an established leader for updating the plumbing systems of old properties, something we’ve been doing for quite a while now, most notably in the many splendid properties in the West End of Vancouver.
Our dedicated residential and commercial plumbing service is a good solution for heritage homes and newer properties all over the greater Vancouver area.
Pioneer Plumbing Repair Service
1101-1202 Harwood St
Vancouver BC, V6E 1S3
Phone: (778) 839-2040
Place ID ChIJfSdjui5zhlQRyb_bmeZDqSo
Friday Open 24 hours
Saturday Open 24 hours
Sunday Open 24 hours
Monday Open 24 hours
Tuesday Open 24 hours
Wednesday Open 24 hours
Thursday Open 24 hours
I am just very involved in clogged drain and I really hope you enjoyed the new page. Sharing is nice. You won’t know, you may be helping someone out. Thank-you for taking the time to read it.